EPK 610 is a single appliance including two instruments allowing to test insulation resistance and to verify either dielectric strength or applied voltage tightness for the basic tests Required by IEC, EN and CEI regulations concerning electrical insulation.

APPARECCHIO PER PROVE DI ISOLAMENTO

EPK 610 is a single appliance   including two instruments allowing to   test insulation resistance and   to verify either dielectric strength or applied voltage tightness for the basic tests Required by IEC, EN and CEI regulations concerning electrical insulation. EPK 610 was designed and made to follow microprocessor technology, in accordance with IEC 1180, EN 61180 and CEI 42 regulations.
Either cycle or single tests can easily be performed and the result can be stored in memory for further processing.
By means of both a parallel gate and a serial gate RS 232, it is possible to link EPK610 to a printer or a PC to transfer test results. Thanks to the electronic handling of test voltage, it is possible to predefine either its value or   its ramp/slope to take voltage to its full value without using a manual variator.
EPK 610 is a very compact appliance interfacing with the operator through 9 keys and an alphanumeric LCD, that make handling and running of different tests very easy.
EPK 610 can be operated also through a PLC or keyboard, using a connector on the back panel. The connector makes all control keys, alarm and I/O signals available.
To   improve the operator safety and to make EPK 610 ergonomic, all   the connectors are put only on the back of the appliance, while the function buttons and all the information necessary to the correct execution of the tests can be very easily found on the frontal panel.
Its little size makes EPK 610 proper to be used in measurement laboratories or on production lines, where flexibility and ease in use are essential.
Setting verification, executed with S.I.T. certified instruments, is an integral part of the appliance.

TECHNICAL SPECIFICATIONS:

DIELECTRIC STRENGTH TEST
*VOLTAGE*
Settable parameters	from 400 V to 5000 V a.c.
Settable parameters resolution	20 V
Measurement fields	from 0 to 5000 V
Measurement fields resolution	10 V
Read value precision	± 2 % or 10 V
*VOLTAGE INCREASING SLOPE*
Settable parameters	0,05 - 0,10 - 0,25 - 0,50 - 1, 00 - 1,50 KV /sec
Slope speed precision	± 10 %
Slope voltage precision	± 20 %
*CURRENT*
Settable parameters	from 0,1 mA to 100 mA
Settable parameters resolution	0,1 mA
Measurement fields	da 1 mA a 100 mA
Measurement fields resolution	0,1 mA
Read value precision	± 2 % oppure 0,2 mA
*TIMER*
Settable parameters	Off or from 1 to 250 sec.
Settable parameters resolution	1 sec.
Read value precision	± 0,1%
INSULATION RESISTANCE TEST
*VOLTAGE*
Settable parameters	500 V - 1000 V - 1500 V dc
Measurement fields	da 0 V a 1550 V
Read value precision	± 2% oppure 2 V
*TIMER*
Settable parameters	Off or from 1 to 250 sec
Settable parameters resolution	1 sec
Read value precision	± 0,1 %
*RESISTANCE*
Settable parameters	da 0,2 M a 200 M
Settable parameters resolution	0,010 M da 0,2 a 0,999 M 0,100 M da 1 a 9,99 M 1,000 M da 10 a 199 M
Measurement fields	da 0,2 M a 200 M
Measurement fields resolution	0,001 M da 0,2 a 0,999 M 0,010 M da 1 a 9,99 M 0,100 M da 10 a 199,9 M
Read value precision	± 2 % oppure 2 DIGIT

Torna alla pagina precedente